8 Bands High Power Mobile Signal Jammer, High Power Jammer network control+touch screen control

Product Features:

• Internal Cooling fan to make the jammer work more stably
• Provide 360 degree jamming
• Remote control available to ON/OFF the jammer
• Output power can be adjustable
• Each frequency channel can be controlled separately
• Frequency ranges selectable

Product Applications:

Prisons, Recording Studios, Banks, Contract Tendering Rooms, Churches, Classrooms, Testing Facilities, Security Services, Military Units, Secret Services, News Conference Rooms, Libraries, Museums, Courts, Border Patrol and Drug Enforcement, Customs, etc.

Technical Specifications:

Total RF Output Power: up to 160W
Jamming frequency bands 6-8 bands selecable:

Jamming Range: 2 to 100 meters depending on the environment signal strength
Working Hours: long time

Power Supply: 110V to 240VAC
Product Dimension:400mm x 115mm x 300mm (L x W x H)
Antenna Dimension:610mm(L)
Net Weight: 13kg
Humidity: 30%-95%
Operating Temp: -10ºC - +65ºC
Antennas: 7pcs Omni Antennas
Remote Control: network control available
Touch settings:
After entering the settings screen;

Touch the content you want to set;

If you set the power amplifier switch, after the first touch, the control changes to the selected state:

Touch again, change the switch status, and save settings, return to the settings interface display mode, that is, mode0;

If you set the power amplifier attenuation, after the first touch, jump to the keyboard interface;

The channel number for the current setting.

Cancel, click exit.

Sure, enter the correct settings, save and exit.

Digital keyboard

Clear all

Delete one bit

The effective input value of the attenuation value is 0~31, which is invalid beyond this zone setting;

After you enter a valid attenuation value, click enter to return to the settings interface.

Again, touch the settings area to save the settings and return to the settings display interface. That is, the mode0 mode;

Note: when using the keystroke mode and the mode1, the touch is not valid. When in mode0 and mode2 mode, the touch is equally valid;The channel 5~8 is the same as the channel 1~4 operation.

Step5 Close the screen

1 . the RF switch is switched off by remote operation software, and the power amplifier stops working (if the screen is required to be plugged in or plugged in), the operation is not performed;

2 . disconnect the "AC~220V" AC power line and the mains power;

3 . remove the RJ45 communication cable;

Product image show: